Aspire Dynamo Kit
Aspire Dynamo Vape Kit Review and Tutorial
Even though the Dynamo is a dual battery mod, it is still quite ergonomic and comfortable to hold thanks to its rounded sides and corners. It has an output wattage of up to 220 watts regardless of which type of battery is used; 18650, 20700 or 21700.
The new press fit Nepho coils supplied with the Nepho Tank come in two types with two resistances. The first, a 0.5ohm Kanthal wire coil and Aspire’s all new mesh coil rated at 0.15 ohms, again made with Kanthal wire. Both have excellent wicking properties due to the large wicking ports.
Nepho coil Installation
Coil installation couldn’t be easier. Simply unscrew the base hardware, pull out the used coil, replace it with a new one (it just drops in) and screw the base hardware back to the tank. The new Nepho coils are now press fit so are much less messy to handle when replacing.
Filling the Revvo mini tank is another of Aspire’s innovative designs, and it couldn’t be simpler. In the centre of the tank, accessible directly through the mouthpiece, sits a spring-loaded filling tube. The spring of the tube is soft enough to allow even slight pressure from almost any type of bottle/glass dropper to open it, but strong enough to create a leak proof seal when released after filling and the strong Pyrex glass tank allows you to see at a glance the amount of e-liquid in the tank.
Cygnet Battery Installation
Turn off the MOD and remove tank. Pull the lock catch to allow the battery door to open. When replacing the batteries, please pay attention to the correct positive and negative connections. Then insert the battery of your choice, 18650 (use the supplied silicon adapter), 20700 or 21700. Insert the batteries as seen in the diagram and close the battery door, ensuring the door catch is securely fastened.
Please note: Due to the mod being designed to be compatible with 21700 batteries, when using 20700 batteries in this mod, there will be a 1mm gap, if you shake the mod vigorously with the 20700 batteries inside which is not recommended, you may hear a rattling sound, however it will not in any way affect the function or performance of the mod.
Press the fire button to enter. When you are in “Time Set” press the fire button to choose the value you want to adjust, press up or down button to change the values and turn on or off the watch. Enter Watch UI to choose your preferred watch UI displayed on your mod; we’ve created 11 different types of Watch UI to expand your choices.
The Dynamo kit comes with all the safety features that Aspire is famous for.
Charging the mod via Micro-USB charging port, the charging current can reach up to 2A . When connecting the mod to the charger, the screen will display two growing battery icons with the 2 circular rings around the screen edge showing a rotary movement when charging. The screen also displays the battery percentage, charge time and charge current. Once the battery level reaches 4.2V or when it’s fully charged, the mod will stop charging and the screen will shut off.
The mod will not charge when the batteries are incorrectly installed or when there’s only one battery installed. The batteries cannot be replaced while charging. Please unplug the charging cable before changing the batteries.
1* Dynamo mod / 1* Nepho Tank / 1* Glass tube / 8* O-rings / 2* Coils (1*0.5Ω & 1*0.15Ω Mesh Coil) / 1* USB Cable / 1* Warning card / 1* User manual / 1* Warranty card / 1* Dual 18650 battery adapter